1, the fuse burned; replace the fuse.
2, relay overload action; overhaul and reset.
3, loose wiring or poor contact; maintenance tightened.
4, the voltage is too low; overhaul.
5, the motor failure; repair or replacement.
6, the body fails; replace the oil, hand rotating body, if unable to rotate, dismantling.
7, relay failure; check the power cord and the contacts.
8, poor contact switch or failure; check the wiring or replacement switch.
9, there is pressure in the oil barrel oil; check the relief valve.
10, the controller detects the phase sequence error; maintenance / replacement.
11, pressure / sensor break; repair / replacement.
Mitsubishi Automatic Door System
Elevator Automatic Door,Sliding Elevator Door,Lift Landing Door
Lefeng Elevator Parts Co., Ltd. , http://www.szelevator.com
没有评论:
发表评论