GDL multi-stage boiler feed pump working conditions

GDL multi-stage boiler feed pump uses a wide range of purposes, can be used for high pressure operating system hot and cold water circulation and booster, high-rise building multiple pumps in parallel water supply, fire fighting, boiler feed water and cooling water systems and a variety of washing liquid Conveying and so on. So in the use of these areas, GDL-type multi-stage boiler feed pump What are the working conditions?

1, GDL-type multi-stage boiler feed pump can deliver clean water or physical and chemical properties similar to the liquid water;

2, the temperature range: -15 ℃ ~ +120 ℃;

3, working pressure: the maximum pressure of 2.5MPa, that is, the system pressure = inlet pressure + closing valve working pressure

4, the ambient temperature should be below 40 ℃, the relative humidity does not exceed 95%;

5, conveying corrosive media and hot liquids, it is necessary to advance in advance of the manufacturer, so that the use of special materials to meet the requirements.

【Print】 【Close】

Continuous Waste Tyre Pyrolysis Plant

Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 25-40 tons.

Flowchat of Continuous Waste Tyre Pyrolysis Plant

Advantages of Continuous Waste Tyre Pyrolysis Plant

1. Large daily capacity of 25 MT raw materials, and can work 24 hours without any stop for 15-20 days;

2. Auto-loading, auto-discharging and oil coming out at the same time;

3. Only need fuel for the beginning 2-3 hours, then the sync gas generates itself is enough to support heating, saving fuel cost;

4. Low requirement on the raw materials, no need tiny granule, 5cm pieces acceptable for smooth running;

5. High efficiency condensers, more oil output, good quality oil, easy to clean.

6. Sync gas recycling system, fully burned after recycling and utilization, preventing pollution and saving fuel cost.

7. National patent smoke scrubber, can efficient remove the acid gas and dust of the smoke, environmental friendly to meet related national standards.

8. Easy to operate, need less manpower.

Technical Parameter of Continuous Waste Tyre Pyrolysis Plant

NO.	ITEM	Technical Parameter
1	Suitable Raw Materials	Small pieces of Waste tyre,rubber, waste plastic≤5cm
2	Operating Mode	Fully Continuous Operation
3	Structure	Horizontal Type Revolve
4	Loading and discharging	Fully Automatic Feeding and Discharging under High Temperature at Same Time
5	Capacity(24h)	8-20Mt
6	Work Pressure	Slightly Negative Pressure
7	Oil Yield of tyres	40%-45%
8	Reactor Rotational Speed	1R/M
9	Installation Power	110kw
10	Cooling Method	Cycle water
11	Type of Drive	Sprocket Wheel
12	Heating Method	Hot Air
13	Noise dB(A)	≤85
14	Main Reactor Weight (MT)	About 20Mt
15	Total Weight(MT)	About 45Mt
16	Installation Space Required	60m*20m
17	Manpower	2/shift
18	Shipment	5*40HC
19	Delivery time	≤70Days

Continuous Waste Tyre Pyrolysis Plant

Continuous Pyrolysis ,Continuous Pyrolysis Plant,Continuous Waste Tyre Recycling,Waste Tyre To Oil

Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclingthewaste.com