Combination machine is based on common parts, together with the specific shape of the workpiece and processing technology designed by the special components and fixtures, composed of semi-automatic or automatic machine.
It is generally multi-axis, multi-knife, multi-process, multi-faceted or multi-station at the same time processing, production efficiency several times higher than the universal machine to several times. As the common parts have been standardized and serialized, can be flexibly configured as needed, which can shorten the design and manufacturing cycle.
Therefore, the combined machine tool has the advantages of low cost and high efficiency, is widely used in mass production and mass production, and can be used to form an automatic production line.
Combination machine tools are generally used for processing box type or extraordinary shape of the parts. During machining, the workpiece is generally not rotated, the drilling tool, reaming, counterbore, reaming, boring, milling plane, internal and external thread cutting and machining of the external circle are realized by the rotary motion of the tool and the relative feed movement of the tool and the workpiece And face and so on.
Some combination machine a workpiece using the turning head clamp to be rotated by the feeding movement for the tool can also be realized rotating parts for certain (e.g., flywheel, rear axle half shaft, etc.) and the outer face machining.
Special machine tools are developed with the rise of the automotive industry. In the special machine parts due to repeated use, and gradually developed into a common component, resulting in a combination of machine tools.
In order to make the combination machine tool can be used in small and medium-sized batch production, often need to apply group technology, the structure and process similar parts concentrated in a combination of machine processing, in order to improve machine utilization.
There are two common types of machines of this type, which are interchangeable headstock box-type machines and turret-type machine tools.
1. Introduction of Waste Lube Oil Distillation Plant
Waste Lube Oil Distillation Plant ,is the new technology which can refine the waste lube oil into base oil(which can be made into diesel and gasoline after processed by our catalyst). The oil quality is better than the original normal pressure distillation technology, which show on purity ,transparence, lightness .this technology will do deodorization and destinke process to the raw material oil automatically by "dry type" vacuum pressure distillation method. With the vacuum distillation technology, the distillation temperature is considerably reduced, and the oil output will higher 5%-10% compared with original normal pressure distillation technology. It makes more profits to the enterprise virtually.
2. Raw material which can be used
a. Waste oil .example: waste diesel, waste oil residue etc.
b. tire/rubber oil
c. plastic oil
d. crude oil
e. waste engine oil
f. waste motor oil
g. waste lube oil
h. waste transformer oil
i. underground oil
3. Models of waste lube oil distillation plant
4. Installation: We will be in charge of arranging our engineer to go to your place to guide the installation and train your workers how to operate the waste lube oil distillation plant ,and buyer will be in charge of the food, accommodation and round air tickets.
5. Waste Lube Oil Distillation Plant Exporting Experience:
| America: | Brazil, Canada, Colombia, USA, |
| Middle East: | Dubai, Iran, Jordan, Saudi Arabia, Turkey |
| Europe: | Albania , Bosnia and Herzegovina |
| Asia: | Afghanistan, India, Malaysia, Pakistan, Philippines, South Korea, Vietnam, Myanmar |
| Africa: | Ghana, Mozambique, Zambia |
Waste Lube Oil Distillation Plant
Waste Lube Oil Distillation Plant,Continuous Lube Oil Distillation Plant,Lube Oil Recycling Plant,Essential Oil Refinery Plant
Shangqiu Sihai Energy Technology Co., Ltd , https://www.sihaienergy.com
没有评论:
发表评论