Use Fencing to Reinforce Concrete

Use Fencing to Reinforce Concrete

Concrete dries into a hard stonelike material, though over time most concrete will crack or crumble in some way. Concrete is often reinforced with rebar or a welded wire mesh, but you can accomplish the same task if you have chain link fencing left over from other projects. By weaving smaller metal bars into the chain fence you can create a sturdy reinforcement for your concrete that will combine the rigidity of rebar with the area coverage of wire mesh.

1 Spread out the chain link fence. Pull the fence tight, then weave metal bars or heavy wire into the fence at regular intervals. Make sure that you place the bars or wire both lengthwise and widthwise into the fencing.

2 Build up an enclosure around the area where you will pour your concrete using lumber and nails. Once filled, this enclosure will create the shape of the concrete you pour and will prevent it from running while it dries.

3 Create supports for your fence using pieces of the metal bar or small bricks. Your goal is to have the fence and its grid of bars or wire suspended halfway through the concrete so that it will provide additional strength to the middle. No part of the fence or supports should extend above the concrete or into any area where it will be seen.

4 Cut the wire of the chain link fence to better fit the area of the concrete. This will prevent pieces of metal being visible in the concrete as would happen if you cut the fence after the concrete had dried.

5 Mix and pour the concrete according to package directions. Let the concrete settle, then use a trough to finish the concrete surface as normal. As the concrete sets and hardens it will have the chain link fencing material and bars or wire in its core to provide it with additional strength.

Derrick Flc500 Pwp Shaker Screen

Replacement Screens for Derrick 500 Series Shale Shakers – PWP

Derrick FLC 500 PWP Shaker Screen is designed for the replacement screen of Derrick FLC 500 series shale shakers. It is constructed with two or three layers of 304 or 316 stainless steel wire mesh cloth, and then combined together with a steel backing plate. The FLC 500 PWP screen features a single side quick-lock tension system that reduces panel replacement time.

Technical Parameter

• Material: stainless steel 304/316/316 L.
• Construction Type: PWP (perforated wear plate).
• Wear Mesh Shape: rectangle.
• API RP 13 C Designation: API 20 – API 325.
• Series: DX, DF, HP optional.
• Color: green.
• Package: 2 pcs per carton, packed in wooden case.

Adaptable Shale Shaker Model

SJ-Derrick FLC500 PWP Shaker Screen are used as the substitute screen for

• Derrick FLC (Flo-line Cleaner) 503 shaker.
• Derrick FLC (Flo-line Cleaner) 504 shaker.
• Derrick FLC (Flo-line Cleaner) 503 drying shaker.
• Derrick FLC (Flo-line Cleaner) 504 drying shaker.
• Derrick FLC (Flo-line Cleaner) 513 shaker.
• Derrick FLC (Flo-line Cleaner) 514 shaker.
• Derrick FLC (Flo-line Cleaner) 513 VE (Vapor Extraction).
• Derrick FLC (Flo-line Cleaner) 514 VE (Vapor Extraction).

Competitive Advantage

• Stainless steel 304/316 wire mesh for longevity.
• Quick-lock tension system, excellent trapping (dreg) effect.
• Easy screen inspection, removal, and installation.
• Increase shaker capacity and reduce mud loss.
• Scientific & reasonable cost control system for competitive price.
• Higher flow rates without sacrificing cut point integrity.
• API RP 13C (ISO 13501) compliant.
• Adequate inventory in the shortest time to meet customers' demand.

Remarks:

Derrick, FLC 500, PWP, DX, DF, HP are marks of Derrick Corporation.

ShengJia only produces the replacement screens but not original from Derrick.

Derrick FLC500 PWP Shaker Screen

Derrick Flc500 Pwp Shaker Screen,Derrick Flc500 Shaker Screen,Derrick Flc500 Shale Shaker Screen,Derrick Flc5000 Pwp Shale Shaker Screen

Anping Shengjia Hardware Mesh Co.,ltd , https://www.oilshakerscreen.com